turns out there's a much easier way to set NVRAM vars
Removed NVRAM binary file creation. This simplifies things greatly.
This commit is contained in:
Jack
+51
-195
@@ -2,10 +2,10 @@
|
||||
# Semi-automatic installer of macOS on VirtualBox
|
||||
# (c) myspaghetti, licensed under GPL2.0 or higher
|
||||
# url: https://github.com/myspaghetti/macos-guest-virtualbox
|
||||
# version 0.80.6
|
||||
# version 0.81.0
|
||||
|
||||
# Requirements: 40GB available storage on host
|
||||
# Dependencies: bash >= 4.3, xxd, gzip, unzip, wget, dmg2img,
|
||||
# Dependencies: bash >= 4.3, unzip, wget, dmg2img,
|
||||
# VirtualBox with Extension Pack >= 6.0
|
||||
|
||||
function set_variables() {
|
||||
@@ -43,7 +43,7 @@ ROM='%aa*%bbg%cc%dd'
|
||||
# ioreg -l -p IODeviceTree | grep \"system-id
|
||||
SYSTEM_UUID="aabbccddeeff00112233445566778899"
|
||||
# csrutil status
|
||||
SYSTEM_INTEGRITY_PROTECTION='0x10' # '0x10' - enabled, '0x77' - disabled
|
||||
SYSTEM_INTEGRITY_PROTECTION='10' # '10' - enabled, '77' - disabled
|
||||
|
||||
|
||||
# terminal text colors
|
||||
@@ -163,14 +163,12 @@ if [ -n "$(sw_vers 2>/dev/null)" ]; then
|
||||
fi
|
||||
fi
|
||||
|
||||
# check for xxd, gzip, unzip, coreutils, wget
|
||||
if [ -z "$(echo "xxd" | xxd -p 2>/dev/null)" \
|
||||
-o -z "$(gzip --help 2>/dev/null)" \
|
||||
-o -z "$(unzip -hh 2>/dev/null)" \
|
||||
# check for unzip, coreutils, wget
|
||||
if [ -z "$(unzip -hh 2>/dev/null)" \
|
||||
-o -z "$(csplit --help 2>/dev/null)" \
|
||||
-o -z "$(wget --version 2>/dev/null)" ]; then
|
||||
echo "Please make sure the following packages are installed:"
|
||||
echo "coreutils gzip unzip xxd wget"
|
||||
echo "coreutils unzip wget"
|
||||
echo "Please make sure the coreutils package is the GNU variant."
|
||||
exit
|
||||
fi
|
||||
@@ -438,65 +436,10 @@ if [[ ( ( "${vbox_version:0:1}" -lt 6 ) || ( "${vbox_version:0:1}" = 6 && "${vbo
|
||||
fi
|
||||
}
|
||||
|
||||
function create_nvram_files() {
|
||||
print_dimly "stage: create_nvram_files"
|
||||
# Each NVRAM file may contain multiple entries.
|
||||
# Each entry contains a namesize, datasize, name, guid, attributes, and data.
|
||||
# Each entry is immediately followed by a crc32 of the entry.
|
||||
# The script creates each file with only one entry for easier editing.
|
||||
#
|
||||
# The hex strings are stripped by xxd, so they can
|
||||
# look like "0xAB 0xCD" or "hAB hCD" or "AB CD" or "ABCD" or a mix of formats
|
||||
# and have extraneous characters like spaces or minus signs.
|
||||
|
||||
# Load the binary files into VirtualBox VM NVRAM with the builtin command dmpstore
|
||||
# in the VM EFI Internal Shell, for example:
|
||||
# dmpstore -all -l fs0:\system-id.bin
|
||||
#
|
||||
# DmpStore code is available at this URL:
|
||||
# https://github.com/mdaniel/virtualbox-org-svn-vbox-trunk/blob/master/src/VBox/Devices/EFI/Firmware/ShellPkg/Library/UefiShellDebug1CommandsLib/DmpStore.c
|
||||
|
||||
function generate_nvram_bin_file() {
|
||||
# input: name data guid (three positional arguments, all required)
|
||||
# output: function outputs nothing to stdout
|
||||
# but writes a binary file to working directory
|
||||
local namestring="${1}" # string of chars
|
||||
local filename="${namestring}"
|
||||
# represent string as string-of-hex-bytes, add null byte after every byte,
|
||||
# terminate string with two null bytes
|
||||
local name="$(for (( i=0; i<"${#namestring}"; i++ )); do printf -- "${namestring:${i}:1}" | xxd -p | tr -d '\n'; printf '00'; done; printf '0000' )"
|
||||
# size of string in bytes, represented by eight hex digits, big-endian
|
||||
local namesize="$(printf "%08x" $(( ${#name} / 2 )) )"
|
||||
# flip four big-endian bytes byte-order to little-endian
|
||||
local namesize="$(printf "${namesize}" | xxd -r -p | od -tx4 -N4 -An --endian=little)"
|
||||
# strip string-of-hex-bytes representation of data of spaces, "x", "h", etc
|
||||
local data="$(printf -- "${2}" | xxd -r -p | xxd -p)"
|
||||
# size of data in bytes, represented by eight hex digits, big-endian
|
||||
local datasize="$(printf "%08x" $(( ${#data} / 2 )) )"
|
||||
# flip four big-endian bytes byte-order to little-endian
|
||||
local datasize="$(printf "${datasize}" | xxd -r -p | od -tx4 -N4 -An --endian=little)"
|
||||
# guid string-of-hex-bytes is five fields, 8+4+4+4+12 bytes long
|
||||
# first three are little-endian, last two big-endian
|
||||
# for example, 00112233-4455-6677-8899-AABBCCDDEEFF
|
||||
# is stored as 33221100-5544-7766-8899-AABBCCDDEEFF
|
||||
local g="$( printf -- "${3}" | xxd -r -p | xxd -p )" # strip spaces etc
|
||||
local guid="${g:6:2} ${g:4:2} ${g:2:2} ${g:0:2} ${g:10:2} ${g:8:2} ${g:14:2} ${g:12:2} ${g:16:16}"
|
||||
# attributes in four bytes little-endian
|
||||
local attributes="07 00 00 00"
|
||||
# the data structure
|
||||
local entry="${namesize} ${datasize} ${name} ${guid} ${attributes} ${data}"
|
||||
# calculate crc32 using gzip, flip crc32 bytes into big-endian
|
||||
local crc32="$(printf "${entry}" | xxd -r -p | gzip -c | tail -c8 | od -tx4 -N4 -An --endian=big)"
|
||||
# save binary data
|
||||
printf -- "${entry} ${crc32}" | xxd -r -p - "${vmname}_${filename}.bin"
|
||||
}
|
||||
|
||||
# MLB
|
||||
MLB_b16="$(printf -- "${MLB}" | xxd -p)"
|
||||
generate_nvram_bin_file MLB "${MLB_b16}" "4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14"
|
||||
|
||||
# ROM
|
||||
# Convert the mixed-ASCII-and-base16 ROM value
|
||||
function create_macos_installation_files_viso() {
|
||||
print_dimly "stage: create_macos_installation_files_viso"
|
||||
echo "Creating EFI startup script"
|
||||
# Convert the mixed-ASCII-and-base16 values
|
||||
# into an ASCII string that represents a base16 number.
|
||||
ROM_b16="$(for (( i=0; i<${#ROM}; )); do let j=i+1;
|
||||
if [ "${ROM:${i}:1}" == "%" ]; then
|
||||
@@ -506,40 +449,19 @@ ROM_b16="$(for (( i=0; i<${#ROM}; )); do let j=i+1;
|
||||
echo -n "${x}"; let i=i+1;
|
||||
fi;
|
||||
done)"
|
||||
generate_nvram_bin_file ROM "${ROM_b16}" "4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14"
|
||||
|
||||
# system-id
|
||||
generate_nvram_bin_file system-id "${SYSTEM_UUID}" "7C436110-AB2A-4BBB-A880-FE41995C9F82"
|
||||
|
||||
# SIP / csr-active-config
|
||||
generate_nvram_bin_file csr-active-config "${SYSTEM_INTEGRITY_PROTECTION}" "7C436110-AB2A-4BBB-A880-FE41995C9F82"
|
||||
}
|
||||
|
||||
function create_macos_installation_files_viso() {
|
||||
print_dimly "stage: create_macos_installation_files_viso"
|
||||
echo "Creating EFI startup script"
|
||||
echo 'echo -off' > "startup.nsh"
|
||||
echo 'echo -off
|
||||
setvar MLB -guid 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14 -nv ="'"${MLB}"'"
|
||||
setvar ROM -guid 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14 -nv ='"${ROM_b16}"'
|
||||
setvar system-id -guid 7C436110-AB2A-4BBB-A880-FE41995C9F82 -nv ='"${SYSTEM_UUID^^}"'
|
||||
setvar csr-active-config-guid 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14 -nv ='"${SYSTEM_INTEGRITY_PROTECTION}"'
|
||||
'> "${vmname}_startup.nsh"
|
||||
if [[ ( "${vbox_version:0:1}" -lt 6 ) || ( "${vbox_version:0:1}" = 6 && "${vbox_version:2:1}" = 0 ) ]]; then
|
||||
echo 'load fs0:\EFI\driver\AppleImageLoader.efi
|
||||
load fs0:\EFI\driver\AppleUiSupport.efi
|
||||
load fs0:\EFI\driver\ApfsDriverLoader.efi
|
||||
map -r' >> "startup.nsh"
|
||||
map -r' >> "${vmname}_startup.nsh"
|
||||
fi
|
||||
echo 'if exist "fs0:\EFI\NVRAM\MLB.bin" then
|
||||
dmpstore -all -l fs0:\EFI\NVRAM\MLB.bin
|
||||
dmpstore -all -l fs0:\EFI\NVRAM\ROM.bin
|
||||
dmpstore -all -l fs0:\EFI\NVRAM\csr-active-config.bin
|
||||
dmpstore -all -l fs0:\EFI\NVRAM\system-id.bin
|
||||
endif
|
||||
for %a run (1 5)
|
||||
if exist "fs%a:\EFI\NVRAM\MLB.bin" then
|
||||
dmpstore -all -l fs%a:\EFI\NVRAM\MLB.bin
|
||||
dmpstore -all -l fs%a:\EFI\NVRAM\ROM.bin
|
||||
dmpstore -all -l fs%a:\EFI\NVRAM\csr-active-config.bin
|
||||
dmpstore -all -l fs%a:\EFI\NVRAM\system-id.bin
|
||||
endif
|
||||
endfor
|
||||
for %a run (1 5)
|
||||
echo 'for %a run (1 5)
|
||||
if exist "fs%a:\macOS Install Data\Locked Files\Boot Files\boot.efi" then
|
||||
"fs%a:\macOS Install Data\Locked Files\Boot Files\boot.efi"
|
||||
endif
|
||||
@@ -548,7 +470,7 @@ for %a run (1 5)
|
||||
if exist "fs%a:\System\Library\CoreServices\boot.efi" then
|
||||
"fs%a:\System\Library\CoreServices\boot.efi"
|
||||
endif
|
||||
endfor' >> "startup.nsh"
|
||||
endfor' >> "${vmname}_startup.nsh"
|
||||
|
||||
echo ""
|
||||
echo "Creating VirtualBox 6 virtual ISO containing the"
|
||||
@@ -590,7 +512,7 @@ for filename in "ApfsDriverLoader.efi" "AppleImageLoader.efi" "AppleUiSupport.ef
|
||||
done
|
||||
|
||||
# EFI startup script
|
||||
echo "/startup.nsh=\"startup.nsh\"" >> "${macOS_release_name}_Installation_files.viso"
|
||||
echo "/startup.nsh=\"${vmname}_startup.nsh\"" >> "${macOS_release_name}_Installation_files.viso"
|
||||
|
||||
}
|
||||
|
||||
@@ -939,9 +861,8 @@ send_keys
|
||||
kbstring='shutdown -h now'
|
||||
send_keys
|
||||
send_enter
|
||||
printf 'Partitioning the optional assistive virtual disk and copying the optional
|
||||
NVRAM files. Partitioning the target, the installer, and the assistive virtual
|
||||
disks. Loading base system onto the installer virtual dis. Moving installation
|
||||
printf 'Partitioning the target virtual disk and the installer virtual disk.
|
||||
Loading base system onto the installer virtual disk. Moving installation
|
||||
files to installer virtual disk, updating InstallInfo.plist, and rebooting the
|
||||
virtual machine.
|
||||
|
||||
@@ -962,82 +883,6 @@ echo "${macOS_release_name}_BaseSystem.vdi detached from the virtual machine"
|
||||
echo "and released from VirtualBox Manager."
|
||||
}
|
||||
|
||||
|
||||
function configure_nvram_parameters() {
|
||||
print_dimly "stage: configure_nvram_parameters"
|
||||
echo "Configuring the NVRAM is not required to run macOS."
|
||||
echo ""
|
||||
echo "The NVRAM parameter assignment can be edited at the top of the script."
|
||||
echo "If the NVRAM parameters are set to the defaults, or if the virtual machine"
|
||||
echo "is powered up, or if the BaseSystem.vdi is not available, the NVRAM"
|
||||
echo "configuration will be skipped."
|
||||
|
||||
if [[ ! ( "$( VBoxManage list runningvms )" =~ ^\""${vmname}" ) && ( -s "${macOS_release_name}_BaseSystem.vdi") && ! ( "${DmiBoardSerial}" = "NO_LOGIC_BOARD_SN" && "${MLB}" = "${DmiBoardSerial}" && "${ROM}" = '%aa*%bbg%cc%dd' && "${SYSTEM_UUID}" = "aabbccddeeff00112233445566778899" && "${SYSTEM_INTEGRITY_PROTECTION}" = '0x10' ) ]]
|
||||
then
|
||||
if [ -w "${vmname}_nvram_files.vdi" ]; then
|
||||
echo "NVRAM files virtual disk image ready."
|
||||
else
|
||||
echo "Creating ${vmname} NVRAM files virtual disk image."
|
||||
VBoxManage createmedium --size=100 \
|
||||
--filename "${vmname}_nvram_files.vdi" \
|
||||
--variant standard 2>/dev/tty
|
||||
fi
|
||||
print_dimly "The following stages are executed as part of configure_nvram_parameters:"
|
||||
configure_vm
|
||||
create_nvram_files
|
||||
create_macos_installation_files_viso
|
||||
echo "Attaching the base system disk image, the VISO,"
|
||||
echo "and the NVRAM files disk image to the virtual machine."
|
||||
VBoxManage storagectl macOS --remove --name SATA >/dev/null 2>&1
|
||||
VBoxManage storagectl "${vmname}" --add sata --name SATA --hostiocache on >/dev/null 2>&1
|
||||
VBoxManage storageattach "${vmname}" --storagectl SATA --port 1 --hotpluggable on \
|
||||
--type hdd --nonrotational on --medium "${macOS_release_name}_BaseSystem.vdi" >/dev/null 2>&1
|
||||
VBoxManage storageattach "${vmname}" --storagectl SATA --port 2 \
|
||||
--type dvddrive --medium "${macOS_release_name}_Installation_files.viso" >/dev/null 2>&1
|
||||
VBoxManage storageattach "${vmname}" --storagectl SATA --port 0 --hotpluggable on \
|
||||
--type hdd --nonrotational on --medium "${vmname}_nvram_files.vdi" >/dev/null 2>&1
|
||||
|
||||
echo "Starting virtual machine ${vmname}. This should take a couple of minutes."
|
||||
( VBoxManage startvm "${vmname}" >/dev/null 2>&1 )
|
||||
prompt_lang_utils
|
||||
prompt_terminal_ready
|
||||
# Find the 104MB nvram files disk and partition as FAT32; not necesasry for installing macOS
|
||||
kbstring='disks="$(diskutil list | grep -o "104[^ ]* MB *disk[0-9]$" | sort -gr | grep -o disk[0-9] )" && disks=(${disks[@]}) && '\
|
||||
'diskutil partitionDisk "/dev/${disks[0]}" 1 GPT FAT32 "NVRAMFILES" R && '\
|
||||
'mkdir -p "/Volumes/NVRAMFILES/EFI/NVRAM" && '\
|
||||
'cp "/Volumes/'"${macOS_release_name:0:5}-files"'/"*.bin "/Volumes/NVRAMFILES/EFI/NVRAM/" && '\
|
||||
'cp "/Volumes/'"${macOS_release_name:0:5}-files"'/"*.nsh "/Volumes/NVRAMFILES/" && '\
|
||||
'shutdown -h now'
|
||||
send_keys
|
||||
send_enter
|
||||
|
||||
printf '
|
||||
'"${highlight_color}"'Please start the "'"${vmname}"'" virtual machine '"${warning_color}"'manually'"${highlight_color}"' and press Esc'"${default_color}"'
|
||||
'"${highlight_color}"'immediately when the VirtualBox logo appears to enter the boot menu.'"${default_color}"'
|
||||
|
||||
Choose "'"${highlight_color}"'Boot Manager'"${default_color}"'" and then "'"${highlight_color}"'EFI Internal Shell'"${default_color}"'".
|
||||
The EFI shell startup script will run and update the virtual machine'"'"'s NVRAM
|
||||
parameters. It is not necessary to allow macOS to continue booting after the
|
||||
script has run.
|
||||
|
||||
Power off the virtual machine then press enter to continue.'
|
||||
clear_input_buffer_then_read
|
||||
|
||||
else
|
||||
printf '
|
||||
The following command can be used to create and transfer the NVRAM files to the
|
||||
fully installed macOS VM at any time:
|
||||
|
||||
'"${0} create_nvram_files create_macos_installation_files_viso"'
|
||||
|
||||
Attach the VISO file to the VM and copy the bin files from the VISO to the
|
||||
macOS boot EFI partition and run the EFI Internal Shell script. This is only
|
||||
required if the NVRAM parameters are updated after the installation. Otherwise,
|
||||
the current NVRAM files will already be present and the script does not need to
|
||||
be run again.'
|
||||
fi
|
||||
}
|
||||
|
||||
function populate_macos_target() {
|
||||
print_dimly "stage: populate_macos_target"
|
||||
if [[ "$( VBoxManage list runningvms )" =~ ^\""${vmname}" ]]; then
|
||||
@@ -1058,8 +903,8 @@ prompt_lang_utils
|
||||
prompt_terminal_ready
|
||||
add_another_terminal
|
||||
echo ""
|
||||
echo "The second open Terminal in the virtual machine copies EFI and NVRAM files"
|
||||
echo "to the target EFI partition when the installer finishes preparing."
|
||||
echo "The second open Terminal in the virtual machine copies EFI Internal Shell"
|
||||
echo "files to the target EFI partition when the installer finishes preparing."
|
||||
|
||||
# run script concurrently, catch SIGUSR1 when installer finishes preparing
|
||||
kbstring='disks="$(diskutil list | grep -o "[0-9][^ ]* GB *disk[0-9]$" | sort -gr | grep -o disk[0-9])"; '\
|
||||
@@ -1068,10 +913,8 @@ kbstring='disks="$(diskutil list | grep -o "[0-9][^ ]* GB *disk[0-9]$" | sort -g
|
||||
'mkdir -p "/Volumes/'"${vmname}"'/tmp/mount_efi" && '\
|
||||
'mount_msdos /dev/${disks[0]}s1 "/Volumes/'"${vmname}"'/tmp/mount_efi" && '\
|
||||
'mkdir -p "/Volumes/'"${vmname}"'/tmp/mount_efi/EFI/driver/" && '\
|
||||
'mkdir -p "/Volumes/'"${vmname}"'/tmp/mount_efi/EFI/NVRAM/" && '\
|
||||
'[ -a "/Volumes'"${macOS_release_name:0:5}-files"'/ApfsDriverLoader.efi" ] && cp "/Volumes/'"${macOS_release_name:0:5}-files"'/"*.efi "/Volumes/'"${vmname}"'/tmp/mount_efi/EFI/driver/" ; '\
|
||||
'cp "/Volumes/'"${macOS_release_name:0:5}-files"'/"*.bin "/Volumes/'"${vmname}"'/tmp/mount_efi/EFI/NVRAM/" && '\
|
||||
'cp "/Volumes/'"${macOS_release_name:0:5}-files"'/startup.nsh" "/Volumes/'"${vmname}"'/tmp/mount_efi/startup.nsh" && '\
|
||||
'[ -a "/Volumes'"${macOS_release_name:0:5}-files"'/ApfsDriverLoader.efi" ] && cp "/Volumes/'"${macOS_release_name:0:5}-files"'/"*.efi "/Volumes/'"${vmname}"'/tmp/mount_efi/EFI/driver/" ; '\
|
||||
'installer_pid=$(ps | grep startosinstall | cut -d '"'"' '"'"' -f 3) && '\
|
||||
'kill -SIGUSR1 ${installer_pid}'
|
||||
send_keys
|
||||
@@ -1106,7 +949,18 @@ if [[ ( "${vbox_version:0:1}" -lt 6 ) || ( "${vbox_version:0:1}" = 6 && "${vbox_
|
||||
fi
|
||||
printf '
|
||||
|
||||
'"${highlight_color}"'Using iMessage and other connected Apple apps:'"${default_color}"'
|
||||
Set the EFI and NVRAM variables required for iMessage and other connected Apple
|
||||
apps by powering up the virtual machine and immediately pressing Esc when the
|
||||
VirtualBox logo appears. Either the boot menu or the EFI Internal Shell will
|
||||
boot. From the boot menu, select "Boot Manager" then "EFI Internal Shell" and
|
||||
allow the startup.nsh script to run. This occurs automatically on VirtualBox
|
||||
versions 6.0 and lower, but is sometimes skipped with versions 6.1 and higher.
|
||||
|
||||
Setting EFI and NVRAM variables is not required to run macOS.
|
||||
|
||||
'"${highlight_color}"'That'"'"'s it! Enjoy your virtual machine.'"${default_color}"'\n'
|
||||
|
||||
}
|
||||
|
||||
function delete_temporary_files() {
|
||||
@@ -1130,8 +984,7 @@ printf 'The follwing files are safe to delete:
|
||||
"'"${macOS_release_name}_BaseSystem"*'"
|
||||
"'"${macOS_release_name}_Install"*'"
|
||||
"'"Install ${macOS_release_name}.vdi"'"
|
||||
"'"${vmname}_"*".bin"'"
|
||||
"'"startup.nsh"'"\n'
|
||||
"'"${vmname}_startup.nsh"'"\n'
|
||||
if [ -w "ApfsDriverLoader.efi" ]; then
|
||||
printf ' "'"ApfsDriverLoader.efi"'"
|
||||
"'"Apple"*".efi"'"
|
||||
@@ -1150,8 +1003,7 @@ if [ "${delete,,}" == "y" ]; then
|
||||
"${macOS_release_name}_BaseSystem"* \
|
||||
"${macOS_release_name}_Install"* \
|
||||
"Install ${macOS_release_name}.vdi" \
|
||||
"${vmname}_"*".bin" \
|
||||
"startup.nsh" 2>/dev/null
|
||||
"${vmname}_startup.nsh" 2>/dev/null
|
||||
rm "ApfsDriverLoader.efi" \
|
||||
"Apple"*".efi" \
|
||||
"AppleSupport-v2.0.4-RELEASE.zip" 2>/dev/null
|
||||
@@ -1170,15 +1022,20 @@ Add one or more stage titles to the command line to run the corresponding
|
||||
function. If the first argument is "stages" all others are ignored.
|
||||
Some examples:
|
||||
|
||||
"'"${0}"' populate_virtual_disks populate_installer_app"
|
||||
|
||||
These stages might be useful by themselves if the VDI files and the VM are
|
||||
already initialized.
|
||||
|
||||
"'"${0}"' configure_vm"
|
||||
|
||||
This stage might be useful after copying an existing VM VDI to a different
|
||||
VirtualBox installation and having the script automatically configure the VM.
|
||||
|
||||
"'"${0}"' configure_vm create_macos_installation_files_viso"
|
||||
|
||||
These stages might be useful after editing the EFI and NVRAM parameters at the
|
||||
top of the script. Using genuine or genuine-like parameters and applying them
|
||||
allows using iMessage, iCloud, and other connected Apple services.
|
||||
Apply the parameters by copying the "startup.nsh" file to the root of the
|
||||
EFI partition and booting into the EFI Internal Shell by pressing Esc
|
||||
immediately when the VirtualBox logo appears when powering up the VM.
|
||||
|
||||
Dependency-checking and variable-setting is always performed first, whether
|
||||
or not these stages are specified.
|
||||
|
||||
@@ -1190,9 +1047,9 @@ Available stage titles:
|
||||
|
||||
check_bash_version - configure_vm
|
||||
check_gnu_coreutils_prefix / populate_virtual_disks
|
||||
set_variables | configure_nvram_parameters
|
||||
welcome | populate_macos_target
|
||||
check_dependencies | delete_temporary_files
|
||||
set_variables | populate_macos_target
|
||||
welcome | delete_temporary_files
|
||||
check_dependencies |
|
||||
prompt_delete_existing_vm |
|
||||
create_vm |
|
||||
prepare_macos_installation_files |
|
||||
@@ -1220,7 +1077,6 @@ if [ -z "${1}" ]; then
|
||||
create_install_vdi
|
||||
configure_vm
|
||||
populate_virtual_disks
|
||||
configure_nvram_parameters
|
||||
populate_macos_target
|
||||
delete_temporary_files
|
||||
else
|
||||
|
||||
Reference in New Issue
Block a user